Synergy Paramotors -
SYNERGY Paramotor THROTTLE
The only throttle control that keeps your fingers free to operate the paraglider! This innovative system facilitates the overall operation. It is streamlined to prevent lines from getting hooked. It also prevents accidents during warm up on the ground.
Perfect for tandem pilots as well.
If you like aerial photography, fly solo or tandem, this design will make your flights much easier. The velcro wraps around the back of your hand so you don’t have to have a firm grip on it. Blinking fuel level indicator to be visible in sunny conditions when the whole pipe lights up! Cruise control standard on all units.
The only throttle that warns you if your throttle lever is stuck because the piston will drop down. Another safety feature you won’t find on our competitor’s.
The frame and cage collapse in 6 parts making it easy to carry with you everywhere you go. It fits in the trunk of most compact cars! You can also send it to your favorite travel destination ahead of time with your favorite shipper. It fits in a 32”X24”X18”. It accepts a propeller as long as 49”, weighs under 50lb w 100cc motor. It is also very easy to assemble with the help of 9 high strength Velcro cinch straps. No pins and ropes nor fishing net to install.
When you are ready to fly, the SYNERGY is the first one UP!
The wheels, another great feature. Having trained many students and seeing many technical mistakes, it made sense to have them. When the pilot runs during take off and decides to sit in the harness before the aircraft is on an upward trajectory, the wheels get in contact with the ground without stopping the pilot from taking off. It is also easier to move around and prevents premature wear on the frame and cage.
The paragliding harness is made by a well known manufacturer called APCO. It has many compartments including a large one located under the seat plate. The harness is also easy to detach from the unit to fly from hills and practice ground handling (kiting). Saving you from buying an extra harness! The low attachment points improve comfort and handling to fly for hours. Perfect for pilots who enjoy weight shift and soar ridges and thermals.
The frame acts as a fuel tank. It contains enough fuel to fly between 2 and 3 hours depending on the paraglider used and the pilot's abilities. You can add an external tank to extend the duration to ~ 5 hours!
The fuel is contained only in the strongest part of the frame. Every frame is pressure tested, no leaks have been reported. It is made of 1/8” thick high strength tempered Aluminum.
The frame is also designed to accept most engines on the market! You can at a later time change the motor and keep the same frame because it will probably last you forever! Or you can buy a SYNERGY without motor and install it yourself!
The cage is made of tempered aircraft aluminum. It is design to offer minimum resistance to airflow with the high tension tennis string. All strings are netted internally, meaning inside the tubes to prevent premature wear and minimize
resistance to the paraglider’s lines sliding along during a forward inflation. All tubes have the same radius, taking less space in your car or luggage!
It takes extra time and effort to manufacture but proved to be superior!
Prices for Different engine packages.
• We now have frames and kits available starting at $700
• SYNERGY SNAP EGO 110 - centrifugal clutch - weighs ~ 50 lb $6,000
• SYNERGY Polini 20.5HP - centrifugal clutch - weighs ~ 50 lb $6,000
• SYNERGY C-MAX 175 Pull Start 27 HP - weighs ~ 52 lb $5,800
• SYNERGY C-MAX 175 PS + clutch 27 HP - weighs ~ 52 lb $6,000
• SYNERGY C-MAX 175 ES 27 HP - weighs ~ 55 lbs $6,200
• SYNERGY ready to fly package with ITV paraglider - add $2400 to any motor above
• SYNERGY tandem package with CMAX 175 with clutch and ITV Tandem $9,200
Throttle control starts at $150
You can also buy the kit and install the engine and propeller by yourself!
The C-Max motor is made in Italy by Ciscomotors.
Copyright © 2011